|
202 V6100 and V7122 User Guideini File Field NameWeb Parameter Name Valid Range and DescriptionTelProfile_ID[Tel Profile Settings]TelProfile_ =,,,*>,, ,*>,,,,,,,, , , instead>, , ,Preference = (1-10) The preference option is used to determine the priorityof the Profile. Where ‘20’ is the highest preference value. If both IP and Telprofiles apply to the same call, the coders and other common parameters(noted by an asterisk) of the preferred Profile are applied to that call. If thePreference of the Tel and IP Profiles is identical, the Tel Profile parametersare applied.For examples:TelProfile_1 = FaxProfile,1,1,1,40,13,22,33,$$,$$,$$,0,0,0,1,0,0,$$,0,$$TelProfile_2 =ModemProfile,2,2,0,40,13,$$,$$,$$,$$,$$,$$,$$,$$,0,0,0,$$,0,$$$$ = Not configured, the default value of the parameter is used.(*) = Common parameter used in both IP and Tel profiles.The Tel ProfileID can be used in the Trunk Group table(TrunkGroup_x parameter).‘Profile Name’ assigned to a ProfileID, enabling users toidentify it intuitively and easily.This parameter can appear up to 4 times (ID = 1 to 4).Voice Mail ParametersThe Voice Mail (VM) application applies only to the V6100 and V7122. For detailedinformation on VM, see the CPE Configuration Guide for Voice Mail.Table 49 Voice Mail Configuration Parametersini File Field NameWeb Parameter Name Valid Range and DescriptionVoiceMailInterface[Voice Mail Interface]Enables the VM application on the V7122 and determines the communicationmethod used between the PBX and the gateway.0 = None (default).1 = DTMF.2 = SMDI (V7122 only)SubscriptionMode[Subscription Mode]Determines the method the gateway uses to subscribe to an MWI server.Per Endpoint [0] = Each endpoint subscribes separately (default).Per Gateway [1] = Single subscription for the entire gateway.
|
