V6100 and V7122 User Guide 407Switch Description1 = 1 second delay (default).2 = 10 second delay.3 = 30 second delay.4 = 60 second delay.5 = 120 second delay.-bs Use –bs 1 to enable the Selective BootP mechanism.Use –bs 0 to disable the Selective BootP mechanism.The Selective BootP mechanism (available from Boot version 1.92) enables the gateway’sintegral BootP client to filter unsolicited BootP/DHCP replies (accepts only BootP replies thatcontain the text ‘AUDC’ in the vendor specific information field). This option is useful inenvironments where enterprise BootP/DHCP servers provide undesired responses to thegateway’s BootP requests.-be Use -be 1 for the device to send device-related initial startup information (such as board type,current IP address, software version) in the vendor specific information field (in the BootPrequest). This information can be viewed in the main screen of the BootP/TFTP, under column'Client Info‘ (see Figure 131 showing BootP/TFTP main screen with the column 'Client Info' onthe extreme right). For a full list of the vendor specific Information fields, see 1 Using BootP.This option is not available on DHCP servers.Managing Client TemplatesTemplates can be used to simplify configuration of clients when most of the parameters arethe same.Figure 135 Templates Screen
