V6100 and V7122 User Guide 51Figure 16 19-inch Rack & Desktop AccessoriesMounting the V7122The V7122 can be mounted on a desktop, or installed in a standard 19-inch rack. SeeCabling the V7122 for cabling the V7122.Mounting the V7122 on a DesktopNo brackets are required. Optionally, attach the four (supplied) anti-slide bumpers to thebase of the V7122 and place it on the desktop in the position you require.Installing the V7122 in a 19-inch RackUsers can install the device in a standard 19-inch rack either by placing the device on a shelfpreinstalled in the rack (preferred method), or by attaching the device directly to the rack’sframe via integral brackets.Before rack mounting the chassis, attach the two (supplied) brackets to the front sides of thedevice (see Figure 17).To attach the two front side brackets:1 Remove the 2 screws nearest the front panel on either side of the device.2 Align a bracket over 2 holes on one side (so that the bracket’s larger holes face front)and with the 2 supplied replacement screws, screw in the bracket.3 Perform the same procedure on the other side.
