V6100 and V7122 User Guide 387Function SpecificationHot Swap cPCI cards are full hot swap supportedPower supplies are redundant but not hot swappableEnclosure Dimensions 445 x 44 x 300 mm; 17.5 x 1.75 x 12 inch.Installation 1U 19-inch 2-slot cPCI chassis, Rack mount, shelf or desk top.Rack mount with 2 side brackets, option 2 extra (rear) side brackets.Type ApprovalsTelecommunicationStandardsIC CS03; FCC part 68Chassis and Host telecom card are approved to the following telecomstandards: IC CS03; FCC part 68; CTR 4, CTR 12 & CTR 13; JATE; Anatel,Mexico Telecom, Russia CCC, ASIF S016, ASIF S038.Safety and EMC Standards UL 60 950-1, FCC part 15 Class B, (Class A with Sun 2080 CPU card)CE Mark (EN 55022 Class B (Class A with Sun 2080 CPU card), EN 60950-1, EN 55024, EN 300 386), TS001Environmental NEBS Level 3: GR-63-Core, GR-1089-Core, Type 1 & 3. Approved for DCpowered version.Complies with ETS 301019; ETS 300019-1, -2, -3. (T 1.1, T 2.3, T3.2).Approved for 3Com or DC powered versions.TP-1610 SpecificationsTable 82 TP-1610 Selected Technical SpecificationsFunction SpecificationTrunk & Channel Capacity 9Capacity with E1 1, 2, 4, 8 or 16 E1 spans, 30, 60, 120, 240 or 480 digital channels30 Channels on 1 E1 span with gateway-1 only60 Channels on 2 E1 spans with gateway-1 only120 Channels on 4 E1 spans with gateway-1 only240 Channels on 8 E1 spans with gateway-1 only480 Channels on 16 E1 spans with gateway-1 and gateway-2Capacity with T1 1, 2, 4, 8 or 16 T1 spans, 24, 48, 96, 192 or 384 digital channels24 Channels on 1 T1 span with gateway-1 only48 Channels on 2 T1 spans with gateway-1 only96 Channels on 4 T1 spans with gateway-1 only192 Channels on 8 T1 spans with gateway-1 only384 Channels on 16 T1 spans with gateway-1 and gateway-2ProcessorControl Processor Motorola PowerQUICC 8260Control Processor Memory SDRAM 64* - 128 MB (*on 60-channel models)9TP-1610 channel capacity depends on configuration settings.
