V6100 and V7122 User Guide 353For example:<37> Oct 11 16:00:15 mymachine su: 'su root' failed for lonvick on/dev/pts/8When NTP is enabled, a timestamp string [hour:minutes:seconds] is added to allSyslog messages (for information on NTP, see Simple Network Time ProtocolSupport).Syslog ServersUsers can use the provided Syslog server (ACSyslog08.exe) or other third-party Syslogservers.Examples of Syslog servers available as shareware on the Internet: Kiwi Enterprises: www.kiwisyslog.com The US CMS Server: uscms.fnal.gov/hanlon/uscms_server/ TriAction Software: www.triaction.nl/Products/SyslogDaemon.asp Netal SL4NT 2.1 Syslog Daemon: www.netal.comA typical Syslog server application enables filtering of the messages according to priority, IPsender address, time, date, etc.OperationThe Syslog client, embedded in the V7122, sends error reports/events generated by theV7122 unit application to a Syslog server, using IP/UDP protocol.To activate the Syslog client on the V7122 follow these 4 steps:1 Set the parameter ‘EnableSyslog’ to 1 (Table 42).2 Use the parameter ‘SyslogServerIP’ to define the IP address of the Syslog server youuse (Table 42).3 To determine the Syslog logging level use the parameter ‘GWDebugLevel’ (Table 43).4 To enable the gateway to send log messages that report certain types of web actionsaccording to a pre-defined filter use the parameter ‘ActivityListToLog’ (described inTable 43).
