318 V6100 and V7122 User Guideini File Parameter Name DescriptionSS7_LINKSET_ACTION Determines the management field for actions.0 = acSS7LINKSET_PS_ACTION_NONE (default)1 = acSS7LINKSET_PS_ACTION_OFFLINE2 = acSS7LINKSET_PS_ACTION_INSERVICE3 = acSS7LINKSET_PS_ACTION_ACTIVATE4 = acSS7LINKSET_PS_ACTION_DEACTIVATESS7_SN_ACTION_RESULT Determines the management field for actions result.The valid range isacPARAMSET_ACTION_RESULT_SUCCEEDED toacPARAMSET_ACTION_RESULT_FAILED. The default value isacPARAMSET_ACTION_RESULT_SUCCEEDED.SS7 MTP2 Tunneling ini File ExampleFor the SS7 MTP2 tunneling ini file example, note the following: The first ini file acts as an MTP2 tunneling central side (M2UA MGC links). There are 8 SS7 links - 4 links of type: MTP2 MGC, and 4 links of type MTP2. Each pairof links (1 MTP2 MGC and 1 MTP2) defines an MTP2 tunnel. There is 1 interface that is used for the M2UA MGC <=> M2UA SG (Signaling Gateway)connection. There are 4 interface IDs defined: 1 per link (M2UA MGC side). This file is intended for ITU link variant (E1 trunks).To load the example SS7 MTP2 tunneling ini files to V7122 gateways:1 Load the ini file that is shown in Figure 108 to a tunnel central gateway (MTP2 MGC).Load the ini file that is shown in Figure 109 to a tunnel remote gateway (MTP2 SG); theMGC gateway connects (over IP) to the SG gateway. For information on loading an inifile to the gateway, see Modifying an ini File.2 In the MGC gateway, change the parameter ‘SS7_DEST_IP’ to the actual IP address ofthe M2UA SG gateway.3 Change the value of the ‘SyslogServerIP’ parameter in the MGC and SG gateways toyour Syslog server IP address.
