236 V6100 and V7122 User GuideTable 54 Configuration File Parametersini File Field Name Valid Range and DescriptionCallProgressTonesFilename The name of the file containing the Call Progress Tones definitions. See1Chapter 16: Configuration Files for additional information on how to createand load this file.VoicePromptsFileName The name (and path) of the file containing the Voice Prompts definitions.See Prerecorded Tones (PRT) File for additional information on how tocreate and load this file.CASFileName This is the name of the file containing specific CAS protocol definition (suchas ‘E_M_WinkTable.dat’). These files are provided to support various typesof CAS signaling.CASFileName_x CAS file name (e.g., ‘E_M_WinkTable.dat’) that defines the CAS protocol. Itis possible to define up to eight different CAS files by repeating thisparameter. Each CAS file can be associated with one or more of thegateway trunks using the parameter CASTableIndex_x.CASTablesNum Number, 1 to 8. Specifies how many CAS configuration files are loaded.PrerecordedTonesFileName The name (and path) of the file containing the Prerecorded Tones.UserInfoFileName The name (and path) of the file containing the User Information data.SaveConfiguration Determines if the gateway’s configuration (parameters and files) is saved toflash (non-volatile memory).0 = Configuration isn’t saved to flash memory.1 = Configuration is saved to flash memory (default).Reader’s Notes
