V6100 and V7122 User Guide 773 Change the network settings by typing: ‘SCP IP [ip_address] [subnet_mask][default_gateway]’ (e.g., ‘SCP IP 10.13.77.7 255.255.0.0 10.13.0.1’); the new settingstake effect on-the-fly. Connectivity is active at the new IP address.This command requires you to enter all three network parameters (eachseparated by a space).4 To save the configuration, at the prompt, type ‘SAR’ and press enter; the V7122 restartswith the new network settings.Configuring the V7122 Basic ParametersTo configure the V7122 basic parameters use the Embedded Web Server’s ‘Quick Setup’screen (shown in Figure 32). See Accessing the Embedded Web Server for information onaccessing the ‘Quick Setup’ screen.Figure 32 V7122 Quick Setup Screen
