:' - "% 9 ) 4.22.7 RelaysPressing 1 while viewing Read Status Screen #3 will display the following screen:The operator can view the programmed option for each relay by pressing thecorresponding number key.4.22.8 Program CheckPressing 2 while viewing Read Status Screen #3 will cause a screen similar to thefollowing to be displayed:Pressing 1 while viewing the Program Check screen will display a screen which willindicate if any input zones have not been programmed to one of the NotificationAppliance Circuits. Use the up and down arrow keys to view both NACs.Pressing 2 while viewing the Program Check screen will display a screen which willindicate if any output zones have not been programmed to at least one input zone. Use theup and down arrow keys to view all zones.Pressing 3 while viewing the Program Check screen will display a screen which willindicate if any input zones have not been programmed to at least one output zone. Use theup and down arrow keys to view all zones.4.22.9 HistoryPressing 3 while viewing Read Status Screen #3 will display the following screen:The operator can view all events which have been stored in the history file, only alarms orother events, such as troubles or supervisories, by pressing the corresponding number key.READ STATUS1=RELAYS2=PROGRAM CHECK3=HISTORYRead Status Screen #3 RELAY1=RELAY 12=RELAY 23=RELAY 3PROGRAM CHECK1=NACS NO INPUT2=ZONES NO INPUT3=ZONES NO OUTPUTHISTORY1=VIEW ALL2=VIEW ALARMS3=VIEW OTHER EVENTS
