ADT Unimode 9600 Installation And Operating Instruction

Contents

ADT Unimode 9600 Installation And Operating Instruction Manual pdf 14 page image

Product Description Specifications14 Unimode 9600 PN 51336:C 11/06/011.3 SpecificationsAC Power - TB1120 VAC, 60 Hz, 3.2 ampsWire size: minimum 14 AWG (2.00 mm2) with 600 V insulationBattery (Lead Acid Only) - TB2Maximum Charging Circuit: Normal Flat Charge - 27.6 VDC @ 1.00 ampMaximum Battery Charger Capacity: 25 Amp Hour (Unimode 9600 cabinet holdsmaximum of two 18 Amp Hour batteries. For greater than 25 Amp Hour up to 120 AmpHour batteries, use the ADT-CHG-120 Battery Charger and BB-55F Battery Box.Note: Jumper JP3, on the FACP main circuit board, must be cut to disable the FACPbattery charger when using the ADT-CHG-120.Communication Loop - (Standard ) TB8 and (Optional SLC Expander Module) J324 VDC nominal, 27.6 VDC maximumMaximum length is 10,000 ft. (3,000 m) total twisted, shielded pair lengthMaximum loop current is 400 mA (short circuit) or 100 mA (normal)Maximum loop resistance is 40 ohmsSupervised and power-limitedRefer to SLC Loop manual for wiring informationNotification Appliance Circuits - TB4Power-limited circuitryMaximum voltage drop in wiring: 2.0 VDCNominal operating voltage: 24 VDCCurrent-limit: fuseless, electronic, power-limited circuitryMaximum signaling current per circuit: 3.00 amps (see Figure 1.1 on page 15)End-of-Line Resistor: 4.7 kΩ, ½ watt (P/N 71252 UL listed) for NACsRefer to ADT Device Compatibility Document for listed compatible devicesTwo Programmable and One Fixed Output Relay - TB5Contact rating: 2.0 amps @ 30 VDC (resistive), 0.5 amps @ 30 VAC (resistive)Form-C relaysRefer to Figure 2.5 on page 28 for information on power-limited wiring for relay circuitsFour-Wire Resettable Smoke Detector Power (24 VDC nominal) - TB3,Terminals 1 (+) & 2 (-)Maximum ripple voltage: 10 mVRMSUp to 3.0 amps is available for powering 4-wire smoke detectors (see Figure 1.1)Power-limited circuitRefer to ADT Device Compatibility Document for listed compatible devicesNonresettable Power #1 (24 VDC Nominal) - TB3, Terminals 3 (+) & 4 (-)Maximum ripple voltage: 10mVRMSTotal DC current available from each output is up to 3.00 amps (see Figure 1.1)Power-limited circuitNonresettable Power #2 (24 VDC Nominal) - TB3, Terminals 5 (+) & 6 (-)Maximum ripple voltage: 10mVRMSTotal DC current available from each output is up to 3.00 amps (see Figure 1.1)Power-limited circuit