* $ $ , - - 3.7.2 HistoryPressing 2 while viewing Maintenance Screen #1 will cause the following screen to bedisplayed:The History feature allows the operator to view control panel events which have beenstored in a history file in memory and erase the contents of the history filePressing 1 while viewing the History screen will cause the following screen to bedisplayed:To view all the events which have occurred in the control panel since the history file waslast erased, press 1 while viewing the Events screen. To view only alarms which haveoccurred, press 2 while viewing the Events screen. To view events other than alarms,press 3. The most recent event will be displayed on the screen. To view all of the selectedevents, press the up or down arrow keys to scroll through the list of events. If no eventshave occurred, the display will read NO EVENTS IN HISTORY.Pressing 2 while viewing the History Screen will cause the following screen to bedisplayed:Pressing 1 while viewing the Erase History Screen will cause the message ERASINGHISTORY, PLEASE WAIT to be displayed. The display will then return to the HistoryScreen. Pressing 2 will cause the display to return to the History Screen without erasingthe History file.PROGRAMMING1=POINT PROGRAM2=HISTORY3=PROGRAM CHECKMaintenance Screen #1 @@@@@@HISTORY1=VIEW@EVENTS2=ERASE@HISTORYHistory Screen@@@@@@HISTORY1=VIEW@ALL2=VIEW@ALARMS3=VIEW@OTHER@EVENTSEvents Screen@@@ERASE@HISTORY@@@@@PROCEED@?1=YES@@@@@@@@@@@@2=NOErase History Screen
