ADT Unimode 9600 Installation And Operating Instruction

Contents

ADT Unimode 9600 Installation And Operating Instruction Manual pdf 16 page image

Product Description Controls and Indicators16 Unimode 9600 PN 51336:C 11/06/011.4 Controls and IndicatorsLCD DisplayThe FACP uses an 80-character (4 linesX 20 characters) high viewing angleLCD display. The display includes along life LED backlight that remainsilluminated. If AC power is lost and thesystem is not in alarm, the LEDbacklight will turn off to conserve batteries.LED IndicatorsLED indicators are provided to annunciate the following conditions:• AC Power (green)• Fire Alarm (red)• Supervisory (yellow)• Trouble (yellow)• Maintenance/presignal (yellow)• Alarm Silenced signals (yellow)• Disabled (yellow)• Battery fault (yellow)• Ground fault (yellow)Key PanelMounted on the main circuit board, the key panel includes a window for the LCD displayand LED indicators as listed above. The key panel, which is visible with the cabinet doorclosed, has 25 keys, including a 16 key alpha-numeric pad similar to a telephone keypad.Function keys:• Acknowledge/Step• Alarm Silence• Drill• Reset (lamp test)Service/program keys:• Keys labeled 1 to 9• * key• # key• 0 (recall) key• 1st Event key• Clear key• Escape key• Mode key• Four cursor keys (up, down, left and right)• Enter keyLocal Piezo SounderA piezo sounder provides separate and distinct pulse rates for alarm, trouble andsupervisory conditions.SYSTEM ALL NORMAL10:00A 01010114*25036#1stEVENTABC DEFGHI JKL MNOPRS TUV WXYQZ -/.CLR7 8 9 ESCENTERRECALLACK/STEPALARMSILENCEDRILLHOLD 2 SECRESETMODEMAINTENANCEALARMSILENCEDDISABLEDBATTERYGROUNDSUPERVISORYTROUBLEAC POWERFIRE ALARMFigure 1.2 Membrane/Display Panel9600kypd.cdr