Cabletron Systems CyberSWITCH CSX7000 User Manual

Also see for CyberSwitch CSX7000: User guide User guide Release note Quick start

CSX7000 Guide40 CyberSWITCHFunctions protected with the confirmation message include:• processor reset• placing processors online• taking processors offline• clearing reset counters• CPR enable/disable• pending offline enable/disable• group power on/offYou may enable or disable BCVision’s confirmation messages. To do so, select the Enable/DisableConfirmation option from the Supervisor Menu.Enable/Disable SNMP SupportIf you use SNMP, you may enable/disable it through this selection.With SNMP support enabled, BCVision attempts to locate an SNMP agent on the workstation. IfBCVision does not find an SNMP agent, an error message is displayed. If SNMP support is notrequired, the support can be disabled and the error will be avoided.SNMP support is enabled by default. Therefore, the SNMP error message may occur the first timeBCVision is run, but will not occur after SNMP support is disabled.To enable or disable SNMP support, select the Enable/Disable SNMP Support option from theSupervisor Menu.Enable/Disable Alarm NotificationThis capability allows you to turn on or off warning messages at the IES supervisory level. Whenthis capability is enabled (i.e., warning messages on), and EMS detects an alarm condition, it will:• generate an audible alarm,• illuminate the appropriate LED, and• display a message on the BCVision consoleAlarm notification is enabled under the following conditions:• IES communication failure• temperature threshold exceeded• voltage threshold exceeded• fan failure• power supply failure• nonfatal POST test failure• bus terminator is installed backwards• auto-configuration failure• power down test failureTo enable or disable alarm notification, select the Enable/Disable Alarm Notification option fromthe Supervisor Menu. If the option is currently disabled, the message Alarms Disabled will appearin the lower right corner of the screen. If the option is currently enabled, no message will appear.