| 
CSX7000 Guide50 CyberSWITCHView BC Processor DetailYou may view detailed information describing each processor displayed on the BC Status Screen.Access the Processor Detail Display from the Functions Menu, or use the + V key sequence.The Processor Detail Display is generated for all currently highlighted processors. The followingillustrates a sample screen:This screen displays the details of the selected processor at the time the screen is invoked. Thisdisplayed information is static. To update the screen, exit by selecting the OK or Cancel button, andrequest to view the processor again.The fields displayed include:• the Data Highway ID of the subsystem platform as determined by the IES hardware switch set-ting• the Group Number identifying the group in which the processor is installed• the Description field, which may be modified from this screen. (Refer to description on page46).• the Status of the processor• the current CPR condition• the Pending Offline condition• the Reset Counters: CPR Resets - the number of resets performed automatically; Manual resets -the number of resets requested via SNMP or BCVision; Normal Resets - the number of resets per-formed due to loss of carrier. You may clear the Reset Counters from the Functions Menu (page47). The counters are also cleared automatically each time new IES software is transferred tothe IES.Note: The Normal Resets counter is incremented when a processor transitions between DOSand NetWare 3.x/4.x. During this transition the processor is not able to respond to theIES, and therefore the IES detects a processor reset.Mark AllTo mark all processors listed on the BC Status Screen, select this option from the Functions Menu.All other options available from the Functions Menu apply to these “marked” processors.To mark individual processors, highlight the processor on the BC Status Screen and press the.BCVision - BC Processors controlled by IES ModulesFile Supervisor Functions Help** View BC Detail **F1 - Help | Space - Mark | Esc - return to IES Module Screen | |
