Cabletron Systems CyberSWITCH CSX7000 User Manual

Also see for CyberSwitch CSX7000: User guide User guide Release note Quick start

CSX7000 45M ONITORING SYSTEMSAdministration through BCVisionhighway scan, select the Scan Data Highway option from the Functions Menu. This causesBCVision to rebuild its internal list of IES.If an IES is not listed, verify its connection to the data highway. Also confirm that it is assigned aunique identification number by inspecting its switch setting (page 32).Note: You can specify an IES address to scan for a specific IES, if desired.Mark AllTo select all sensors listed on the IES Status Screen, select Mark All from the Functions Menu.You may mark individual sensors by highlighting the IES on the IES Status Screen and pressing the. (Also refer to Mark All Processors.)H ELP M ENUThe options on the Help Menu are:• About Help• Overview• Menu Commands• ° C to ° F Conversion ChartIn addition, the function key provides help on the current function.Press to exit this menu.BC P ROCESSOR S TATUS SCREENThis screen displays status information on all of the BC processors installed in the subsystem of thecurrent IES. You may access this screen in one of two ways:• highlight the desired IES and press • select View BC Processors from the Functions MenuA screen similar to the following will be displayed:G ENERAL INFORMATION D ISPLAYFor each processor module in the platform subsystem, the BC Status Screen displays the IESidentification number, the group number, the status, CPR condition, Pending Offline condition,and description.BCVision - BC Processors controlled by IES ModulesFile Supervisor Functions HelpF1 - Help | Space - Mark | Esc - return to IES Module Screen |