4. Press the pushbutton located under theforward arrow label until the menu fordefault clock and date settings appear.5. Press the pushbutton located under thecurrently displayed status of either ON or OFF.The ON display indicates the radio clockdisplay is disabled and the OFF displayindicates the radio clock display is enabled.Press this pushbutton to toggle the radio clockdisplay on or off.If the radio clock display is turned on, thescreen displays Radio Clock ON for10 seconds, then returns to the originalclock display menu.If the radio clock display is turned off, thescreen displays Radio Clock OFF for10 seconds. The menus for clock and datesettings are removed, and ON displaysas a current status indicating that the clockdisplay can be turned on, if desired.The radio clock and analog clock are notsynchronized. Occasionally you may need to setthe digital radio clock using the procedure below tosynchronize both clocks.Setting the Time and Date on the DigitalRadio ClockIf your vehicle has a radio with a six-disc CD player,it has a MENU button for setting the time and date.To set the time and date, do the following:1. Turn the radio on.2. Press the MENU button until the clock optionis displayed.3. Press the pushbutton located under the clocklabel and the HR, MIN, MM, DD, YYYY (hour,minute, month, day, and year) displays.4. Press the pushbutton located under eachone of the labels that you want to change.Every time the pushbutton is pressed again,the time or the date if selected, increasesby one.• Another way to increase the time or date, isto press the right SEEK arrow or the FWD(forward) button.5. To decrease the time or date, press the leftSEEK arrow or the REV (reverse) button.You can also turn the tune knob, located onthe upper right side of the radio faceplate,to adjust the selected setting.265
