COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001CHAPTER 2 NEW FUNCTIONS2-50Vertical size plateStandard white plateIncreaseDecreaseCopyboard glass Vertical size plateStandard white plateIncreaseDecreaseCopyboard glassHP sensorF02-306-05F02-306-04b. Reversing the Scanner After Scanning in Main Reading DirectionWhen the image has been scanned, the No. 1 mirror base is moved in reverse to home po-sition at the speed used for 50% reduction, regardless of the ratio being used.E202 (HP detection error)[1] The No. 1 mirror base does not reach the HP sensor within a specificperiod of time.[2] The HP sensor identifies the presence of the No. 1 mirror base when theNo. 1 mirror base should have been moved away.E204 (image leading edge detection error)[1] The image signal is not generated when the No. 1 mirror base is movingforward.[2] The ADF does not generate the image leading edge signal in streamreading mode.COPIER>ADJUST>ADJ-XY>ADJ-X (scanner image leading edgeadjustment)Enter an appropriate value to adjust the image leading edge position.Range: 0 through 2970 (a change of ‘12’ causes a shift of 1 mm)COPIER>ADJUST>ADJ>XY>ADJ-S (scanner home position)A numerical entry will adjust the home position (i.e., standard white platereading position).If dirt develops on the standard white plate, execute this adjustment so thatthe machine will take a reading while avoiding the area.Settings: 0 to 4
