COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001CHAPTER 6 TROUBLESHOOTING6-102) Check to make sure the setting of the following is ‘106’:COPIER>ADJUST>BLANK>BLANK-T. If not, enter ‘106’.3) Adjust the image leading edge margin as follows:Generate output by making the following selections: COPIER>TEST>PG5; then, checkthe image leading edge margin.Standard: 4 +1.5, −1.0 mmMode: COPIER>ADJUST>FEED-ADJ>REGIST• A higher setting increases the margin.• A lower setting decreases the margin.F06-201-024) Adjust the image trailing edge margin as follows:Generate output by making the following selections: COPIER>TEST>PG5; then, checkthe image trailing edge margin.Standard: 2.5 ±1.5 mmMode: COPIER>ADJUST>BLANK>BLANK-B• A higher setting increases the margin.• A lower setting decreases the margin.F06-201-034+1.5mm,-1.0mm2.5 1.5mm+
