COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001SERVICE MODES-95COPIER>OPTIONDRM-IDLUse it to set idle rotation mode of the photosensitive drum at power-on.By initiating idle rotation of the photosensitive drum, fusion of tonerto the drum may be avoided. Set it to 1 through 4 if the images aredistorted or too light.Setting 0: do not execute idle rotation (default)1: execute idle rotation for 30 sec if absolute moisture content is 18 g ormore2: execute idle rotation for 2 min if absolute moisture content is 18 g ormore3: execute idle rotation for 30 sec regardless of environment4: execute idle rotation for 2 min regardless of environmentFX-FANSWUse it to switch fixing heat discharge fan control.Setting it to ‘1’ will use half-speed control for the fan after copying/printing.Setting 0: Full speed (default)1: Half speedCONFIGUse it to select multiple pieces of firmware stored on the hard disk to switchbetween countries, languages, destinations, and paper sizes.Setting XXYYZZAAXX: country, YY: language, ZZ: destination, AA: paper size configura-tion. The mode of indication is as selected byCOPIER>DISPLAY>USER>LANGUAGE.1) Select CONFIG.2) Select the item to change to highlight, and press the +/- key.The items that may be changed are XX (00; country) and AA (00; pa-per size configuration).3) See that each press on the +/- key changes the indications in sequence.4) Bring up the appropriate description for all items, and press the OK key.5) Turn off and then on the main power switch.SHARPUse it to change the sharpness level of the image.• A higher setting makes the image sharper.Setting 1 to 5 (default: 3)FDW-DLVUse it to set face-down delivery for multiple-page printing.Setting 0: normal (face-up delivery for all if for single original)1: face-up delivery for one set of prints of single original; face-down de-livery for multiple sets (default)MemoMemo