COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001SERVICE MODES-31.3 Ending Service Mode• Press the Reset key once to return to Service Mode Initial screen (F00-102-01).• Press the Reset key twice to end service mode and return the User screen (standardscreen).If you have used service mode (ADJUST, FUNCTION, OPTION), be sureto turn off and then on the main power switch after ending service mode.1.4 Backing Up Service ModeAt time of shipment from the factory, each machine is adjusted, and the adjustment valuesare recorded on the Service Label (attached to the cover of the Service Book case behind thefront cover).If you have replaced the reader controller PCB, DC controller PCB (or if you have clearedthe RAM of these), the ADJUST and OPTION settings will be replaced by default settings.If you have made adjustments in the field and changed service mode settings, be sure toprint out the Service Label and store it away (COPIER>FUNCTION>MISC-P>LBL-PRINT). If the label lacks items, use its margin.You can also print out a complete list of service mode settings: COPIER>ADJUST/OP-TION/COUNTER; COPIER>FUNCTION>MISC-P>P-PRINT.F00-104-01Service Label
