COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001ERROR CODEE-9E202(iR8500)Main cause The scanner HP sensor (PS1) is faulty. The scanner motor (M5) is faulty.The reader controller PCB is faulty.Condition0000 The scanner home position cannot be detected within a specific pe-riod of time after the power switch or the Start key is turned on.Caution No code is indicated. The keys are disabled. The code may be checked inservice mode (COPIER>DISPLAY>ERR).E202(iR7200)Main Cause The scanner HP sensor (PS102) is faulty. The scanner motor (M101) isfaulty. The reader controller PCB is faulty.Condition0001 The scanner HP sensor does not turn off even when the scanner hasbeen moved 40 mm forward after the main power switch has beenturned on or the Start key has been pressed.0002 The scanner HP sensor does not turn on even when the scanner hasbeen moved 450 mm in reverse.E204(iR8500)Main cause The scanner motor (M5) is faulty. The image leading edge sensor (PS3) isfaulty. The ADF controller PCB is faulty. The reader controller PCB isfaulty.Condition0000 The image leading edge signal is not generated during forwardmovement in fixed reading mode or during a search for home posi-tion. Or, in stream reading mode, the image leading edge signaldoes not arrive from the ADF controller PCB.Caution No code is indicated. The keys are disabled. The code may be checked inservice mode (COPIER>DISPLAY>ERR).E204(iR7200)Main Cause The ADF controller PCB is faulty. The reader controller PCB is faulty.Condition0001 During printing, the image leading edge signal does not arrive fromthe ADF.
