COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001SERVICE MODES-102COPIER>OPTIONCONTROLPDL count function (not used in the machine)Setting 0: do not count PDL output1: count PDL output if control card is connectedB4-L-CNTFor soft counters 1 through 6, set B4 as large-size or small-size.Setting 0: count as small-size (default)1: count as large-sizeTRY-STPUse it to prohibit suspension of printing in response to a limit in the numberof sheets to staple or the presence of mixed sizes in the finisher.Setting 0: normal mode (suspend printing in response; default)1: suspend when height sensor (full stack) goes ONMF-LG-STUse it to indicate the Extra Length key for papers as long as 630 mm(manual feed; free size); for the ADF, up to 630 mm.Setting 0: normal mode (default)1: extra-length mode (indicate key)SPECK-DPUse it to enable/disable the indication of the result of dust detection instream reading mode.Setting 0: disable (default)1: enableCNT-DISPUse it to enable/disable the indication of the serial number in response to apress on the Counter Check key.Setting 0: enable (default)1: disablePH-D-SELUse it to select the number of lines for photo mode.Setting 0: 141 lines (default)1: 134 linesCOPY-JOBUse it to enable/disable a copy job when a card reader or the coin vendor isused.Setting 0: copy job auto start enabled (default)1: copy job auto start disabled
