Canon iR8500 Service Manual
Also see for ImageRunner iR8500 Series: Function guideServise manualService manualService manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             | |
Contents
|
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001CHAPTER 5 MAINTENANCE AND INSPECTION5-174.2 Point to Note on Scheduled ServicingF05-402-01ItemCopyboard glassTool/agent RemarksCleaningAlcoholAlcoholScanning lampReflecting plateLint-free paperBlower brushDry wipingScanning lamp Lint-free paper Dry wipingCleaningNo.1 throughNo.3 mirrorsBlower brush orlint-free paperUsing a blower brush;if dirt is excessive, usinglint-free paperCleaningItem Tool/agent RemarksSeparation clawUpper roller,Lower rollerFeeding assemblyRe-pickup assembly,Reversing rollerRe-pickup assembly,Pickup roller,Registration rollerSolvent ad lint-free paperCleaning oil,Lint-free paperMoist cloth*Lint-free paper CleaningFeeding assemblyAlcohol,Lint-free paperPaper guide Solvent and lint-feed paperAlcohol,Lint-free paperCleaningCleaningCleaningCleaningCleaningItem Tool/agent RemarksManual feed tray,Pickup roller,Feeding rollerVertical pathrollerAlcohol, lint-freepaperAlcohol, lint-freepaperCleaningCleaningItem Tool/agent RemarksPre-exposure lamp · Primary chargingassembly,· Transfer/separationcharging assembly,· Pre-transfer chargingassemblyDust-proofing glassDust-proofing rollerDeveloping assemblybasePre-transfer charginglampTransfer guide(upper/lower)Registration rollerMoist cloth*Alcohol, lint-freepaperAlcohol, lint-freepaperAlcohol, lint-freepaperLint-free paperAlcohol, lint-freepaperCleaning Dry wiping; then, cleaningwith lint-free papermoistened with alcoholDry wiping; then, cleaningwith lint-free papermoistened with alcoholDry wiping; then, cleaningwith lint-free papermoistened with alcoholRemoving toner collectingaround the dust-proofingrollerCleaningCleaning*Be sure no droplet of water remains.Cleaning*Be sure no droplet of water remains.Make thorough checks to be sure that the block (front, rear) is free of melting, thermal deformation, cracking, or yellowing caused by leakage. If a fault is found, replace the part immediately.Make checks and clean as far as the inside of the block (front, rear).Do not use a cloth or the like carrying metal powder.Do not use a wet/moist cloth unless specifically indicated. Use lint-free paper to dry wipe, and then use alcohol. After using alcohol, check to make sure that the part has dried completely.Provide scheduled servicing and replacement at the specified intervals.Notes: |
Related manuals for Canon ImageRunner iR8500 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine