CHAPTER 2 NEW FUNCTIONS2-117COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 20017.9.1 Process Unita. Removing the Process Unit1) Remove the developing assembly.2) Remove the process unit cover (4screws).3) Slide out the fixing/feeder unit.4) Remove the fixing toner cover; take outthe drum protective sheet; and lay itover the fixing/feeder unit.5) Disconnect the connector [1], and re-lease the stopper lever [2]; then, detachthe primary charging assembly [3].6) Disconnect the connector [4], and re-lease the stopper lever [5]; then, detachthe pre-transfer charging assembly [6].F02-709-017) While using the drum stop [1] (foundinside the compartment behind the frontcover) to fix the drum in place, removethe screw [2], and detach the drum fix-ing block [3].8) Detach the drum stopper [1].9) Remove the 3 screws [4], and discon-nect the connector [5]; then, slide outthe process unit [6].F02-709-02[1][3][2] [5][6][4][4][5] [4][4] [1] [2] [3][6]
