COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001CHAPTER 4 INSTALLATION4-9No. Work Checks/remarks8 Take out the 2 slope plates [2] from themiddle of the skid [1].F04-202-089 Remove the 2 pins [2] taped in place tothe slope plate [1].Turn over the slope plate [1], and fit thepin [2] (1 pc. each) while matching thepin holes in the skid and the pin hole inthe slope plate.Holding the grips (front, rear) on the de-livery side of the copier, slide the machinealong the slope plates, then off the skid.F04-202-0910 Take out the parts and attachments fromthe cardboard box that comes with themachine; then, check to make sure thatnone of the foregoing items is missing.[1] [2][1][2]
