164 Dell™ Printer Configuration Web ToolReset Print ServerPurpose:To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initializeNVRAM of the printer from Reset Defaults in the Printer Settings menu.Values:SecurityThe Security tab includes Set Password, Authentication System, Kerberos Server, LDAP Server, LDAPAuthentication, LDAP User Mapping, SSL/TLS, IPsec, 802.1x, IP Filter (IPv4), and SMTP Domain Filtering.Set PasswordPurpose:To set or change the password that is required to access the setup parameters of the printer from the Dell PrinterConfiguration Web Tool. This page can also be displayed by clicking Set Password in the left frame.NOTE: To restore the password to the default (NULL), initialize the non-volatile memory (NVM).NOTE: You can set the password for access to Admin Settings from Panel Lock in Printer Settings.Values:Authentication SystemPurpose:To specify the server authentication type, the server response time-out, or the search time-out.Values:Initialize NIC NVRAM Memoryand restart printer.Click Start to initialize NVRAM, revert network settings to the factory default settings, andreboot the network capability.Restart Printer Click Start to reboot the printer.Administrator Password Sets the password using up to 128 alphanumeric characters.Re-enter Administrator Password Confirms the set password.Access denial by the authenticationfailure of the AdministratorSets how many times the failure in administrator authentication is allowed in total.Sets the number from 5 to 255. If you set 0, this mode is disabled.Authentication Type Authentication SystemSettingsSelect the authentication system from the list.Optional Information Server Response Time-OutSets the amount of time the printer should wait for response from theserver. Sets the time period from 1 to 75 seconds.Search Time-Out Sets the amount of time the printer should wait for searching for the server.Sets the time period from 5 to 120 seconds.
