370 FaxingUsing a Computer ModemIf you want to use your computer modem for faxing or for a dial-up Internet connection, connect the computermodem directly to the rear of your printer with the TAD as shown above.• Set your printer to the Ans Machine/Fax and set Auto Receive Ans/Fax to specify the time for theTAD.• Turn off the computer modem's fax-receive feature.• Do not use the computer modem if your printer is sending or receiving a fax.• Follow the instructions provided with your computer modem and fax application to fax via the computer modem.Printing a ReportThe following reports may be useful when using fax:NOTE: For more information about other reports and how to print a report, see "Report / List."Changing Setting Options1 Press the (Information) button.2 Tap the Tools tab, and then tap Default Settings.3 Tap Fax Defaults.4 Select the desired menu.5 Select the desired setting or enter the value using the number pad, and then tap OK.Speed Dial This list shows all the numbers currently stored in the memory of your printer as speed dialnumbers.Address Book This list shows all the addresses currently stored in the printer's memory as Address Bookinformation.Server Address This list shows all of the numbers currently stored in the printer's memory as Server Addressinformation.Fax Activity This report shows information about the faxes you recently received or sent.Fax Pending This list shows the status of pending faxes.Print Meter This report shows the total number of pages printed. The report will be titled Print VolumeReport or AccessControl Report, depending on the AccessControl Mode setting.To theInternetComputer Line TelephoneAnswering DevicePhonePrinter
