Faxing 347Setting the Time and DateNOTE: It may be necessary to reset the correct time and date if loss of power to the printer occurs.To set the time and date:1 Press the (Information) button.2 Tap the Tools tab, and then tap Admin Settings.3 Tap System Settings.4 Tap General.5 Tap Date & Time.6 Tap Time Zone.7 Tap until the desired geographic region appears, and then select that region.8 Tap until the desired time zone appears, and then select that time zone.9 Tap OK.10 Tap Date.11 Tap – or + or enter the date using the number pad, and then tap OK.12 Tap Time.13 Enter the time using the number pad.14 Tap OK.NOTE: The printer beeps and does not allow you to proceed to the next step if a wrong number is entered.Changing the Clock ModeYou can set the current time using either the 12-hour or the 24-hour format.1 Press the (Information) button.2 Tap the Tools tab, and then tap Admin Settings.3 Tap System Settings.4 Tap General.5 Tap Date & Time.6 Tap Time.7 Tap 12 Hour or 24 Hour, and then tap OK.Setting SoundsSpeaker Volume1 Press the (Information) button.2 Tap the Tools tab, and then tap Admin Settings.3 Tap Fax Settings.4 Tap Fax Line Settings.5 Tap until Line Monitor appears, and then tap Line Monitor.6 Select the desired volume, and then tap OK.7 Turn off the printer, and turn it on again to apply the settings.
