Connecting and Setting Up Your Printer 7710 Select the encryption type from No Security, WEP, WPA-PSK-AES/WEP2-PSK AES, and Mixed Mode PSK inthe Encryption drop-down list box, and then set each item for the encryption type selected.NOTE: For details on each item, see "Dell™ Printer Configuration Web Tool."11 Click Apply New Settings to apply the settings.12 Turn off the printer, disconnect the Ethernet cable and turn it on again.Wireless LAN connection setting is complete.Reconfiguring the Wireless SettingsTo change the wireless settings from your computer, perform the following.NOTE: To change the wireless settings through wireless connection, ensure that the wireless connection setting is completedin "Configuring the Wireless Settings."Reconfiguring the Wireless Settings Using Dell Printer Configuration Web ToolNOTE: The following settings are available when the network mode is set to infrastructure in "Configuring the WirelessSettings."1 Check the IP address of the printer.a Press the (Information) button.b Tap About This MFP.c Tap the Network tab.d Tap button until IP(v4) Address appears, and then check the IP address displayed in the IP(v4)Address.2 Launch the Dell Printer Configuration Web Tool by entering the IP address of the printer in your web browser.3 Click Print Server Settings.4 Click Print Server Settings tab.5 Click Wi-Fi.6 Change the wireless settings of the printer.
