308 CopyingSetting Copy OptionsSet the following options for the current copy job before tapping Copy to begin copying.For details about making copies, see "Making Copies From the Document Glass" and "Making Copies From theDADF."NOTE: The copy options automatically return to their default status after the auto clear timer is expired.Options on each tile are below:• Copy tile– Quantity– Darken / Lighten– Select Tray– 2 Sided Copying– Sharpness– Reduce / Enlarge– Original Size– Original Type– Collation– 2-Up– Margin– Auto ExposureQuantityTo specify the number of copies from 1 to 99.1 Tap – or + to specify the number of copies.Darken / LightenTo adjust the contrast to make the copy darker or lighter than the original:1 Tap Darken/Lighten.2 Drag the desired level on the Darken/Lighten bar, and then tap OK.You can select a contrast level from seven levels between Darken and Lighten.Drag the indicator on the left side of the bar makes the document contrast lighter, and selecting a cell on the rightside of the bar makes the document contrast darker.* Denotes the factory default setting.Darken 3 Works well with light documents or faint pencil markings.Darken 2Darken 1Normal* Works well with normal typed or printed documents.Lighten 1 Works well with dark documents.Lighten 2Lighten 3
