348 FaxingRinger Volume1 Press the (Information) button.2 Tap the Tools tab, and then tap Admin Settings.3 Tap Fax Settings.4 Tap Incoming Defaults.5 Tap Ring Tone Volume.6 Select the desired volume, and then tap OK.7 Turn off the printer, and turn it on again to apply the settings.Specifying the Fax Settings OptionsChanging the Fax Settings Options1 Press the (Information) button.2 Tap the Tools tab, and then tap Admin Settings.3 Tap Fax Settings.4 Select the desired menu.5 Select the desired setting or enter a value.To enter a value, tap – or +, or use the number pad or the keyboard.6 Tap OK.If necessary , repeat steps 4 through 6.Available Fax Settings OptionsYou can use the following settings options for configuring the fax system:Option DescriptionFax Line Settings Fax Number Specifies the fax number of the printer, which will be printed onthe header of faxes. This feature is available when you set FaxHeader to On. The number specified in Fax Number is used inthe printer ID.Country You can select the country where the printer is used.You can change this setting when:• No jobs in operation• No fax jobs waiting in the memoryFax Header Name Specifies the sender’s name to be printed on the header of faxes.Line Type You can select the default line type.• PSTN• PBXLine Monitor Sets the volume of the line monitor, which audibly monitors atransmission through the internal speaker until a connection ismade.
