342 ScanningNOTE: The e-mail addresses needs to be registered before you can select Address Book.4 Tap and specify scan settings such as Output Color, Resolution, File Format, 2 SidedScanning, Darken/Lighten, Contrast, Sharpness, Auto Exposure, Original Size, Margin,and File Naming Mode. For details, see "Scan Settings."5 Tap Send to begin scanning the document and sending an e-mail with the scanned file.Managing the ScannerYou can select the port connected to the computer or set the password for the scanner from the TWAIN driver.Open the application that supports TWAIN, and click Settings in the scanning window.Port SettingsWhen the printer is connected to the computer directly by a USB cable, select USB.When the printer is connected to the network, select Network. Enter the IP address or hostname of the printer inthe IP Address or Hostname text box, and click OK.When the printer is connected to the networkWhen you are using DHCP for TCP/IP setting for the printer, the image capturing software may not find thescanner occasionally due to the change of the IP address allocated for the printer. In this case, check the IP Addressof the printer, and then connect the scanner by specifying the IP address.On Microsoft® Windows ® , you can check the IP address of the printer using the Dell Printer Hub or Dell PrinterManagement Tool. For Dell Printer Hub, select the printer from My Printers, and then click Printer information onthe left of the screen. For Dell Printer Management Tool, select the printer from the drop-down list on the upper-right of the screen, and then click Printer information on the left.Searching the scannerIn the Port Settings tab, you can search the scanners from the network and select the desired one from the detectedscanners.• Search all scanners from the network (Windows ® only)Searches scanners in your network.• Scanner ListDisplays a list of scanners that are detected.• Search againSearches the scanners in your network.• Search Criteria (Windows® only)Displays the Search Criteria dialog box for setting the search condition.
