Setting the IP Address 817 Tap until TCP / IP appears, and then tap TCP / IP.8 Tap Get IP Address.9 Tap Panel, and then tap OK.10 Tap IP Address.The cursor is located at the first octet of the IP address.11 Use the number pad to enter the first octet of the IP address, and then tap .The cursor moves to the next digit.NOTE: You can only enter one octet at a time and must tap after entering each octet.12 Enter the rest of the octets, and then tap OK.13 Tap Subnet Mask.14 Repeat steps 11 and 12 to set Subnet Mask.15 Tap Gateway Address.16 Repeat steps 11 and 12 to set Gateway Address.17 Turn off the printer, and then turn it on again.When Using the Tool Box1 Click Start All Programs Dell Printers Dell Printer Hub or Dell Printer Management Tool.For Windows ® 10: Click the Start button Dell Printer Hub or Dell Printer Management Tool.2 For Dell Printer Hub, select the printer from My Printers on the home screen.For Dell Printer Management Tool, select the printer displayed by default, or another printer from the drop-downlist on the upper-right corner of the home screen.3 Click the shortcut to the Tool Box on the left of the screen.The Tool Box opens.4 Click the Printer Maintenance tab.5 Select TCP/IP Settings from the list at the left side of the page.The TCP/IP Settings page appears.6 Select the mode from IP Address Mode, and then enter the values in IP Address, Subnet Mask, and GatewayAddress.7 Click Apply New Settings to take effect.You can also assign the IP address to the printer when installing the printer drivers with the installer. When you use theWireless or Ethernet Connection feature, and the Get IP Address is set to AutoIP or DHCP on the printer, youcan set the IP address from 0.0.0.0 to the desired IP address on the printer selection window.Verifying the IP SettingsYou can confirm the settings by using the operator panel, printing the system settings report, or using the pingcommand.Verifying the Settings Using Operator Panel1 Press the (Information) button.2 Tap About This MFP.
