• snmp-server community access-list-name ipv6• snmp-server group ipv6• snmp-server group access-list-name ipv6Displaying IPv6 InformationView specific IPv6 configuration with the following commands.• List the IPv6 show options.EXEC mode or EXEC Privileged modeshow ipv6 ?Example of show ipv6 Command OptionsDell#show ipv6 ?accounting IPv6 accounting informationcam IPv6 CAM Entriesfib IPv6 FIB Entriesinterface IPv6 interface informationmbgproutes MBGP routing tablemld MLD informationmroute IPv6 multicast-routing tableneighbors IPv6 neighbor informationospf OSPF informationpim PIM V6 informationprefix-list List IPv6 prefix listsroute IPv6 routing informationrpf RPF tableDell#Displaying an IPv6 Interface InformationTo view the IPv6 configuration for a specific interface, use the following command.• Show the currently running configuration for the specified interface.EXEC modeshow ipv6 interface interface {slot/port}Enter the keyword interface then the type of interface and slot/port information:– For all brief summary of IPv6 status and configuration, enter the keyword brief.– For all IPv6 configured interfaces, enter the keyword configured.– For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port[/subport] information.– For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.– For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.– For a port channel interface, enter the keywords port-channel then a number.– For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.Example of the show ipv6 interface CommandDell#show ipv6 int ManagementEthernet 1/1ManagementEthernet 1/1 is up, line protocol is upIPV6 is enabledStateless address autoconfiguration is enabledLink Local address: fe80::201:e8ff:fe8b:386eGlobal Unicast address(es):Actual address is 400::201:e8ff:fe8b:386e, subnet is 400::/64Actual address is 412::201:e8ff:fe8b:386e, subnet is 412::/64Virtual-IP IPv6 address is not setReceived Prefix(es):400::/64 onlink autoconfigIPv6 Routing 431
