Dell S4048–ON Configuration Manual

Also see for S4048-ON: Deployment guide Troubleshooting guide Configuration guide Configuration guide Configuration guide

Contents

Dell##show role mode configure password-attributesRole access: secadmin,sysadminDell#show role mode configure interfaceRole access: netadmin, sysadminDell#show role mode configure lineRole access: netadmin,sysadminDisplaying Information About Users Logged into the SwitchTo display information on all users logged into the switch, using the show users command in EXEC Privilege mode. The outputdisplays privilege level and/or user role. The mode is displayed at the start of the output and both the privilege and roles for all usersis also displayed. If the role is not defined, the system displays "unassigned" .Example of Displaying Information About Users Logged into the SwitchDell#show usersAuthorization Mode: role or privilegeLine User Role Privilege Host(s) Location0 console 0 admin sysadmin 15 idle*3 vty 1 sec1 secadmin 14 idle 172.31.1.44 vty 2 ml1 netadmin 12 idle 172.31.1.5770 Security