sFlow type :IngressConfigured sampling rate :16384Actual sampling rate :16384Counter polling interval :20Extended max header size :256Samples rcvd from h/w :0Example of the show running-config sflow CommandDell#show running-config sflow!sflow collector 100.1.1.12 agent-addr 100.1.1.1sflow enablesflow max-header-size extendedDell#show run int tengigabitEthernet 1/10!interface TenGigabitEthernet 1/10no ip addressswitchportsflow ingress-enablesflow max-header-size extendedno shutdownsFlow Show CommandsDell Networking OS includes the following sFlow display commands.• Displaying Show sFlow Globally• Displaying Show sFlow on an Interface• Displaying Show sFlow on a Line CardDisplaying Show sFlow GlobalTo view sFlow statistics, use the following command.• Display sFlow configuration information and statistics.EXEC modeshow sflowExample of Viewing sFlow Configuration (Global)The first bold line indicates sFlow is globally enabled.The second bold lines indicate sFlow is enabled on Te 1/16 and Te 1/17Dell#show sflowsFlow services are enabledGlobal default sampling rate: 32768Global default counter polling interval: 201 collectors configuredCollector IP addr: 133.33.33.53, Agent IP addr: 133.33.33.116, UDP port: 634377 UDP packets exported0 UDP packets dropped165 sFlow samples collected69 sFlow samples dropped due to sub-samplingStack-unit 1 Port set 0 H/W sampling rate 8192Te 1/16: configured rate 8192, actual rate 8192, sub-sampling rate 1Te 1/17: configured rate 16384, actual rate 16384, sub-sampling rate 2sFlow 791