Getting StartedConnectionsSettingsPlaybackRemote ControlMulti-zoneInformationTroubleshootingSpecificationsMulti-zoneENGLISHThe operating procedure is the same for “qZone Playback by Speaker Output” and “wZone Playbackby Audio Output (PRE OUT)”.Playback1Turn on the AVR-4810’s power.(vpage 27 “Turning the Power On“)2Turn on the zone power.Operation on the main unitPress,OFF>orfor the zone tobe operated.When the power turns on, the “”, “”or “” indicator lights on the display.Operation on the remote control unitPress[MAIN]to display the mode forthe zone to be operated, the press[ZONEON].When the power turns on, the “”, “”or “” indicator lights on the display.Also press[INPUT SOURCE SELECT]when instandby mode, the power turns on.When using ZONE2, ZONE3 or ZONE4, it ispossible to turn the power for the MAIN ZONEonly on or off by pressing[MAIN ZONE ON]or[MAIN ZONE OFF].bb3Select the input source.Operation on the main unitqPressandselect the zone to be adjusted.wTurnto choose theinput source.Operation on the remote control unitIn the zone mode you want to operate,press[INPUT SOURCE SELECT].The same input source as in the main zone canbe selected easily by pressing the[M.ZONECALL]on the sub remote control unit.bButton located on both the main unitand the remote control unitBUTTONButton only on the main unitButton only on the remote control unit[BUTTON]Symbols used to indicate buttons in this manual4Adjust the item below.Adjust the VolumeOperation on the main unitqPressand select the zone to be adjusted.wTurnVOLUME>toadjust.Operation on the remote control unitIn the zone mode whose volume youwant to adjust, press[VOLUME].GAdjustable rangeH– – ––80dB ~ –40dB ~ 18dB(Whenthe“VolumeDisplay”settingis“Relative”)GAdjustable rangeH0 ~ 41 ~ 99(Whenthe“VolumeDisplay”settingis“Absolute”)Upon purchase, “Volume Limit” is set to “-10dB (71)”.Turning off the Sound Temporarily(MUTE)In the zone mode for which you wantto mute the sound, press[MUTE].The sound is reduced to the level set at menu“Mute Level” (vpage 52).To cancel, either adjust the volume or press[MUTE]again.The setting is canceled when the zone’s poweris turned off.The volume can be adjusted in ZONE2 andZONE3.nbnbbb[VOLUME][MAIN ZONE ON][MAIN ZONE OFF][MUTE][INPUT SOURCESELECT][MAIN][ZONE ON]Sub remote control unit[M. ZONE CALL][ZONE ON][MAIN][ZONE ON][MAIN]
