Denon AVR-4810 Owner's Manual

Also see for AVR-4810: Service manual

Contents

Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsMulti-zoneENGLISHIt is also possible to save three settings for multi-zone.GQuick Select DefaultsHInput Source VolumeZ2/Z3/Z4 Quick Select 1 DVD –40dBZ2/Z3/Z4 Quick Select 2 SAT/CBL –40dBZ2/Z3 Quick Select 3 VCR –40dBZ4 Quick Select 3 DVR –40dB1 Set the items below to the settings you want to save.q Input Source (vpage 97)w Volume Level (vpage 97) (except for ZONE4)2 In the zone mode for which you want to operate,press and hold the desired [QUICK SELECT] until“Memory” appears on the on-screen display ordisplay.The current settings will be memorized.Quick Select FunctionThe settings related to tone adjustment and volume can be made.Menu Operation1 In the zone mode for which you want to operate,press [MENU].The ZONE2 or ZONE3 menu is displayed on the ZONE2monitor.MENU ZONE2INPUT :SAT/CBLSIGNAL:ANALOGVOL. :-40dB>Bass 0dBHPF OFFTreble 0dBLch Lev. 0dBRch Lev. 0dB2 Press uio p to select the menu to be set oroperated.3 Press [MENU] to enter the setting.The on-screen display disappears.>Channel STEREOVol.Lev. - VAR -Vol.Disp RelativeP.On Lev. LASTVol.Limit -10dBMute Lev. FULLMENU ZONE2For ZONE2, the “Zone Setup” can be made while watching the on-screen display.Also, when ZONE3 is operated, the on-screen display appears on theZONE2 monitor, so operation can be performed watching this on-screen display.Calling the Settings OutNaming Quick Select settingsSee “Quick Select Name” (vpage 54).nPress [QUICK SELECT] at which the settings you want tocall out are saved.In ZONE4, only input sources to which NET/USB and digital inputhave been assigned can be selected.Use the sub remote control when performing Quick Select memoryor call-up in ZONE4.••Button located on both the main unitand the remote control unit BUTTONButton only on the main unit