Denon AVR-4810 Owner's Manual

Also see for AVR-4810: Service manual

Contents

Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsSettingsENGLISHChange power amp assignment to suit the speaker system configuration(Amp Assign)Examples of Amp Assign Menu Screen Displays[1st page]Set items 1 ~ 4 referring to “Steps for setting ‘“Amp Assign”’ (vpage 39, 40)AMP ASSIGN [1/2]ConfigZONE2: ZONE3:Extra chAssign ModeFront9.1chSB/FHNORMALNORMALRETURN ReturnSelect the speaker channel configurationItem 1Item 2Item 3Item 4[2nd page]The signal being output by each speaker can change according to “Amp Assign” setting.The speaker terminals and the output from the pre-out terminals can be checked on this screen.AMP ASSIGN [2/2]FRONTSB/H/WCENTERH/WSURR.SW/BAZONE2ZONE3ConfigExtra ChAssign ModeFront9.1chSB/FHNORMALNORMALTERMINAL SIGNAL PRERETURN ReturnFRONTS.BACKCENTERHEIGHTSURR.---------FSBCHSWSWZ2Z3Connect speaker to match above speaker terminal/signalq Current settingsw Speaker terminal namee Signal being output from speaker terminalr Output from pre-out terminalb Terminals not being used are greyed out.See also page 14, 15 for how to connect the speakers.nItems that can be set with the Manual Setup procedurenMaking the speaker settings (Speaker Setup) vpage 38Making the HDMI settings (HDMI Setup) vpage 42Making the audio settings (Audio Setup) vpage 43OPTION Making other settings (Option Setup) vpage 52Making the Multi-zone settings (Zone Setup) vpage 51Making the network settings (Network Setup) vpage 45Making language settings (Language) vpage 56Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.Making the Speaker Settings (Speaker Setup)Default settings are underlined.Making Detailed Settings(Manual Setup)For details on how to select, set and cancel settings for each menu, see “GUI MenuOperation” (vpage 29).Set when changing Audyssey Auto Setup settings, or when changing the audio, video, display orother settings.If you change the speaker settings after performing Audyssey Auto Setup, it will not be possibleto select MultEQ® XT, Dynamic EQ™ and Dynamic Volume™ (vpages 83, 84).Can be used without changing the settings. Please set if necessary.See pages 28, 29 for “GUI Menu Map” and “GUI Menu Operation”.•••qw re