Denon AVR-4810 Owner's Manual

Also see for AVR-4810: Service manual

Contents

Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsSettingsENGLISHMaking Detailed Settings (Manual Setup)Main remote control unitoperation buttons:Displaying the menuCancel the menu:Moves the cursor(Up/Down/Left/Right) :Confirm the setting :Return to previous menuSetting items Setting contentsGUI(Continued)iPod : Set the iPod screen display time when the input source is “iPod”.Always : Show display continuously.30s : Show display for 30 seconds after operation.10s : Show display for 10 seconds after operation.OFF : Turn display off.••••Tuner : Set the tuner screen display time when the input source is“TUNER”.Always : Show display continuously.30s : Show display for 30 seconds after operation.10s : Show display for 10 seconds after operation.OFF : Turn display off.••••Remote Preset CodesSearch a preset code toregister in the remote controlunit.When preset codes are registered in the included main remote controlunit, it can then be used to operate any devices you have, such as DVDplayers or TVs made by different manufacturers.In this menu, you can search and display the preset codes that can bepreset in the included main remote control unit.n Default settings for preset codesDVD PlayerDENON [32134]Video Cassette RecorderTivo [20739]TelevisionSONY [10810]Satellite Set Top BoxDirecTV [01377]n How to search for preset codesOperate with the main remote control unit switched to the “MAIN”mode (vpage 99 “Operating the Main Remote Control Unit”).1. On the GUI menu, select “Remote Preset Codes” and press ENTER orp.2. Pressing ui, select the category of device for preset registration.Then press ENTER or p.REMOTE PRESET CODESBDSelect the device category1HD-DVD ADVD BDVD-R CCD DCD-R EVCR FPVR GPVR/SAT HPVR/CABLE IOPTIONSetting items Setting contentsRemote Preset Codes(Continued)3. Pressing ui, select the first character of the brand name. Then pressENTER or p.b The first character is displayed as 1, A ~ Z.In the case of brand names starting with the @ symbol, select “A”.For brand names that start with codes or numbers other than the @symbol, select “1”.REMOTE PRESET CODESBDSelect first letter of device brand1HD-DVD ADVD BDVD-R CCD DCD-R EVCR FPVR GPVR/SAT HPVR/CABLE IOPTION4. Pressing ui, select the brand name. Then press ENTER or p.REMOTE PRESET CODESSelect the device brandH & B-DVD-HaazHaierHanseaticHarman/KardonHCMHDTHEHeliosCH-[1/3]Previous CH+ NextOPTIONb When there are several pages of brand names, the pages can beswitched by pressing the main remote control unit’s CH+ or CH–when the main remote control unit is in “MAIN” mode.See overleaf