Denon AVR-4810 Owner's Manual

Also see for AVR-4810: Service manual

Contents

Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsPlaybackENGLISHOther Operations and Convenient FunctionsDENON LINK 4th uses the clock of the AV amplifier connected byDENON LINK to achieve HDMI signal transfer with little jitter whenplaying BD.NOTESet the Blu-ray disc player’s “HDMI Control” setting to “ON”, the“DENON LINK” setting to “4th”. For instructions on operation, referto the Blu-ray disc player’s manual.The jitter-free function does not work except during BD playback. Inthis case, the video signal is output from the HDMI OUT terminal,and the audio signal from the DENON LINK terminal.When a BD is played with the input mode set to “Auto”, playbackis performed in the DENON LINK 4th mode. When a disc otherthan a BD is played with the input mode set to “Auto”, playback isautomatically performed in the DENON LINK 3rd mode.When the input mode is set to “HDMI”, normal HDMI playback isperformed.When the input mode is set to “Digital”, playback is fixed to theDENON LINK 3rd mode and BDs cannot be played.•••••1 Assign “HDMI” to the input source to be used, andassign “D.LINK” to the “Digital” setting (vpage58 “Input Assign”).2 Set “HDMI Control” – “Control” (vpage 43) to“ON”.3 Either turn or press [INPUTSOURCE SELECT] to select the input source assignedin step 1.The “ ” indicator lights on the display.4 Set “Input Mode” (vpage 61) to “AUTO”.5 Select the surround mode (vpage 78 “Selecting theSurround Mode (Surround Mode)”).6 Start playing the BD.Playback starts.Other OperationsPlaying a Blu-ray Disc Player Compatiblewith DENON LINK 4thTo play DENON LINK 4th signals, make HDMI and DENON LINKconnections with the compatible Blu-ray disc player.Button located on both the main unitand the remote control unit BUTTONButton only on the main unit