Denon AVR-4810 Owner's Manual
Also see for AVR-4810: Service manual
                                                                                                                                                | |
Contents
|
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsTroubleshootingENGLISHSymptom Cause / Countermeasure PageCannot connect tonetwork.The settings of the SSID and network key (WEP) are incorrect.Match the network settings with the AVR-4810’s settings.The reception is poor and the signals cannot be received. Shortenthe distance from the wireless LAN’s access point, remove anyobstacles and otherwise improve visibility, then try reconnecting.Also install away from microwave ovens and the access points ofother networks.There are multiple networks and the usable channels overlap. Setthe access point’s channel settings away from the channels usedfor other networks. Alternatively, connect using a network cable.•••45 ~ 47––Played sound isinterrupted or soundcannot be played.There are multiple networks and the usable channels overlap. Setthe access point’s channel settings away from the channels usedfor other networks. Alternatively, connect using a network cable.• –GWireless LANHRestoring All the Settings to as They were at theTime of Purchase (Resetting the Microprocessor)Perform this procedure if the display is abnormal or if operations cannot be performed.When the microprocessor is reset, all the settings are reset to their default values.1 Turn off the power using |
Related manuals for Denon AVR-4810
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine