Denon AVR-4810 Owner's Manual

Also see for AVR-4810: Service manual

Contents

Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsConnectionsENGLISHRequired systemBroadband Internet connectionModemRouterWhen using the AVR-4810, we recommend you use a routerequipped with the following functions:Built-in DHCP serverThis function automatically assigns IP addresses on the LAN.Built-in 100BASE-TX switchWhen connecting multiple devices, we recommend a switchinghub with a speed of 100 Mbps or greater.When using with a wireless LAN, prepare a broadband routerwith built-in access point.Ethernet cable (CAT-5 or greater recommended)Use for wired LAN.Some flat type Ethernet cables are easily affected by noise.We recommend using a normal type cable.ComputerGRecommended systemHOS :Windows® XP Service Pack2 or later, Windows VistaSoftware (Prepare one of the following.)Windows Media Player ver.11DLNA-compatible server softwareInternet browser :Microsoft Internet Explorer 6 or laterLAN port300 MB or more free disk spaceOperation is possible with DLNA servers other than the above,but such DLNA servers are not supported. For details, check theWeb.nnn••••nn•••••••bIf you have an Internet provider contract for a line on which networksettings are made manually, make the settings at “NetworkConnecting” (vpage 45).With the AVR-4810, it is possible to use the DHCP and Auto IPfunctions to make the network settings automatically.When using the AVR-4810 with the broadband router’s DHCPfunction enabled, the AVR-4810 automatically performs the IPaddress setting and other settings.When using the AVR-4810 connected to a network with no DHCPfunction, make the settings for the IP address, etc., at “NetworkConnecting” (vpage 45).The AVR-4810 is not compatible with PPPoE. A PPPoE-compatiblerouter is required if you have a contract for a line of the type withwhich the PPPoE is set.Depending on the ISP with which you have your contract, it may benecessary to make proxy server settings to use the Internet radiofunction. If you made proxy server settings on the computer toconnect to the Internet, make the proxy server settings on the AVR-4810 in the same way.•••••NOTEA contract with an ISP is required to connect to the Internet.No additional contract is needed if you already have a broadbandconnection to the Internet.The types of routers that can be used depend on the ISP. Contact anISP or a computer shop for details.Depending on the server, video files may be displayed, but theycannot be played on the AVR-4810.•••[Wireless LAN]Connecting DevicesInternetModem ComputerRouter withaccess pointTo WAN sideRod antenna(supplied)Turn clockwise.