Eaton Powerware Series User Manual

Also see for Powerware Series: Installation and operation manual User guide User guide User guide Installation and operation manual

Contents

INSTALLATIONEATON BladeUPS® (12 kVA) User's Guide 164201649 Rev 4www.eaton.com/powerquality 31Rack Setup for the UPSC A U T I O NThe UPS is heavy (see page 99). Removing the UPS from its carton requires a minimum of two people. Usethe corrugated lifting sling (packaged with the UPS) to move the UPS.NOTE Mounting rails are required for each individual cabinet.To install the UPS rail kit:1. Select the proper holes in the rack for positioning the UPS in the rack (seeFigure 17).NOTE The UPS takes up position 1 through position 12.NOTE Verify that the hole patterns on the rails and mounting brackets align with the hole pattern on therack.Position 1Position 9MountingBracketTop of RailPosition 12Position 4Bottom of Rackor Top of OtherCabinetBottom of RailFigure 17. Front Rail Screw Positions for the UPS