OPERATIONEATON BladeUPS® (12 kVA) User's Guide 164201649 Rev 4www.eaton.com/powerquality64The following table shows the indicator status and description.Indicator Status DescriptionGreenOn The UPS is operating normally.Flashing The UPS is starting up or is shut down and waiting for power toreturn. A new information message is active. Bypass is not available.Off The UPS is turned off and will not turn on automatically.YellowOn The UPS is in Battery mode.YellowOn The UPS is in Bypass mode.RedOn The UPS has an active alarm.Flashing There is a new UPS alarm condition. See “Troubleshooting” onpage 105 for additional information.Changing the LanguagePress and hold the first button on the left for approximately five seconds to select thelanguage menu. This action is possible from any LCD menu screen.Display FunctionsAs the default or after 15 minutes of inactivity, the LCD displays the selectable Startscreen. The default is the Eaton logo and can be changed to the Mimic screen in theUser Settings menu.The backlit LCD automatically dims after a long period of inactivity. Press any buttonto restore the screen.Press any button to activate the menu options. Use the two middle buttons ( and )to scroll through the menu structure. Press the button to enter a submenu. Pressthe button to select an option. Press the ESC button to cancel or return to theprevious menu.