Compatibility12303/11 MN05013002Z-ENCompatibility The coupling unit stores the data of the devices actuallyconnected when the configuration button is pressed(= stored gateway target configuration).Each time the gateway starts there is a check whether thisconfiguration has been changed. If this is the case, the dataexchange between gateway and SmartWire-DT slaves is notstarted. (In this comparison, the missing slaves are notincluded, what is important is whether the found slaves areidentical.)A project configuration is specified via the programmingsystem by selecting the SmartWire-DT slave (= plannedtarget configuration). This is downloaded automatically tothe gateway by the Moeller programming system duringtransfer of the program to the controller.h Information relating to the gatewayEU5C-SWD-CANDownload of the configuration is an extended utility thatis not available in standard CANopen configurators. Forthis purpose easySoft-CoDeSys offers you the option“Create SDO for module list” in the controller configura-tion of the CAN gateway in the Module selection tab.If a “Planned configuration” cannot be downloaded to thegateway, the configuration comparison has to be switchedoff (the parameter “Disable configuration check” in theService data objects tab must have the value 1).A configuration comparison and a resultant application ofthe compatibility list is therefore not possible. The userhimself must check whether the configuration agrees.
