Programming theEU5C-SWD-DP3403/11 MN05013002Z-ENParameter settingParameters for communication of the coupling unit with thePROFIBUS master and with the SmartWire-DT network arealso defined in the controller configuration.The meaning of the individual tabs:“Basic Parameters” tabHere you can define the I/O start addresses for the mappingof the SmartWire-DT slaves onto the inputs and outputs ofthe controller map. As standard the programming systemcreates complete connection to the I/Os up to now. You can,however, change these values to other, unassigned areas.“DP Parameters” tabThe parameters that relate to communication with the fieldbus PROFIBUS-DP are entered under these settings. Theseinclude, for example, the DP-slave address (node ID) or themonitoring time (watchdog control).Figure 12: Setting the DP parameters
