3. Press SEL . The Starting Waypoint field will flash“INS?” (insert) or “CHG?” (change). Press ENTERto start editing the Starting Waypoint selection.Start: Ins?Spacing :5.0Direction :0004. Choose a waypoint using normal selectionmethods. Then, press ENTER.5. Turn the LARGE knob to the Spacing option. Turnthe SMALL knob to select the desired patternspacing. You may select between 0.2 and 9.9 nm.Start:ONP arptSpacing :5.0Direction :0006. Turn the LARGE knob to the Direction of Traveloption. Turn the SMALL knob to select the desiredDirection of Travel. You may select a directionfrom 0 to 359.Start:ONP arptSpacing :3.5Direction :0007. Press ENTER when selections are complete.8. Press ENTER again to activate the search pattern.You will automatically return to the SAR Mappage. The PAT annunciator above the smart keywill be highlighted. Press the PAT smart key againto disable the search pattern.4-27Moving Map FunctionsENTERSELPATENTERENTERENTER
