FlyingDirect-To aWaypointPressing DIRECT-TO allows you to quickly makechanges to your TO waypoint. When you pressDIRECT-TO, the default waypoint shown will be thecurrent TO waypoint in the Nav or Flight Planfunctions or the waypoint displayed in the Databaseor Info functions. See page 3-31 for more details.1. Press the DIRECT-TO key. The display will godirectly into the Waypoint Database and thewaypoint type will flash.VOR CVOSALEMCITY OR USA2. Use the LARGE and SMALL knobs with one of theWaypoint Selection techniques described on page2-1 to choose a waypoint.3. After selecting the desired waypoint, press ENTER.Your Apollo GX will now switch to the Navigationfunction and show information based on a directroute from your present position to the Direct-Todestination waypoint.ete aHIO 00:12“ 0.002Brg 346 35.2nm·NoteSee Direct-To Entry Options on page 7-8in the System Functions chapter for details.When the option is set to “May Clear,” youractive flight plan is deleted when you useDirect-To for flying to a new destination. Ifyour new Direct-To waypoint is in theactive flight plan, the flight plan is notdeleted. When the option is set to “NeverClears,” the Direct-To waypoint is insertedinto your active flight plan before thecurrent TO waypoint. “May Clear” is thedefault setting.2-7Getting StartedDENTER
