5. Turn the LARGE knob back to the “Offset” field.Press ENTER when the “Use?” prompt flashes toactivate Parallel Track. A “p” will appear next tothe waypoint identifier to indicate that ParallelTrack is in use. The MSG annunciator will flashand a message will state that Parallel Track is inuse. Press MSG to view the message.Parallel TrackOffset: Use?LEFT 5.0nmete pCVO 00:220.034 “Brg 186 46.1nm·GPS Position The GPS Position page shows the calculated Latitudeand Longitude, as well as its Position Dilution ofPrecision (PDOP). The PDOP value, shown below“PDOP,” is based on the geometry of the satellitesused in the position solution. A lower number is abetter value than a large one. A PDOP value of 3 willprovide a more reliable position fix than a value of 7.In the Navigation function, turn the LARGE knob todisplay the GPS Position page. The PDOP value isshown in the lower, right corner (1.9 is shown here).GPS Position44°10.11N PDOP123015.84W 1.93-21Navigation BasicsMSGENTER
